Hedeby Quiver – the finish

 

This part is really just a quick finish and review of the success or otherwise of the project.

First the hanging straps – we know they are folded leather, sewn with a saddle stitch along one edge. One end loops through the tab on the side and is stitched to itself. Interestingly, I quickly found that the top extension of the tab keeps the hanging strap sitting at the correct angle.

At the top end, we don’t know. We’re missing that bit. It could have been some sort of hook or escutcheon like these from Birka or just about anything. I’ve gone with the safe option and just repeated the loop from the other end of the strap. I don’t know what the width of the belt is that my client will be using, just that he wants the top of the quiver to sit at waist height.

Here’s how it looks:

I’ve borrowed my son’s 28″ arrows for the test, my 32″ monsters are a bit long for this period and type of quiver. There is a little wadded woolen fabric in the bottom to stop the heads marking the leather. I think it helps keep all the arrows at the same height, which is what I prefer. Without it the arrows in the centre would sit lower than the ones around the edge.

Now take a quick look back at the Leatherwork from Hedeby post. Having made this one, I’m fairly confident the finds at Hedeby represent two different, but similar quivers. I’ve think I’ve managed to match the shapes and angles of all the pieces, and in all but the outer seams on the carrying tabs, I’ve been able to match the thread impressions, or lack thereof on all pieces. I think there’s a fair chance the carrying tabs had a thin leather wrap around the edges as the originals had stitch holes but no thread impressions.

Here endeth the build. If you are interested, follow my attempt at a quiver from Nydam Mose on my other blog.

 

 

Hedeby Quiver – part the third

When we left at the end of the previous episode, we’d just started assembling the front parts and the hanging tabs. The errata found that I’d misread the German, while it was early enough to do something about it.

I think we should all view this update as a learning experience, or several. Attaching the back was the same as attaching the lower front piece. The stitches go from the skin side on the back, out the edge, through both layers of the piping, through the edge of the front and out the skin side. Repeat as desired. I found as I went that the quiver tightened on the wooden core. Wrapping the core in unwaxed kitchen paper provided a low-friction layer and stopped the leather from getting stuck.

So on to our first disaster. It’s 35 degrees C inside, I’m sweating like the proverbial and I’m stitching with steel needles, pulling them through the leather layers with a pair of 19th century steel lasting pliers and my stupidly salty sweat starts pulling iron ions from the tools and transferring them to the leather, where they react to form perfect, black stained ferric tannate fingerprints.

The wisdom of the Internet suggested juice from a lemon as a good way of removing the stains, and the results were even better than advertised.

SONY DSC

After. And there was much rejoicing.

For the last half inch (or metric half-inch, if you prefer), I decreased the height of the piping until it was flat with the seam at the top. This makes fitting the collar piece a little easier.

SONY DSC

Finished main part of the quiver. The kitchen paper is visible, it made it much easier to get the wooden core out.

All the seams were dampened, and given a bit of a push or prod until I was satisfied with the way they sat.

I hit this with three good coats of dye and while that dried, made the mould for the collar.

SONY DSC

The mould was just a plank of radiata pine with the appropriate bits carved out and a ridge added to the the narrow bit near the top.

SONY DSC

The red stuff is car putty, I had a few problems with tear-outs. Case the leather, lay it over the design, clamp in place and work through from the back with a bone or wooden folder.

SONY DSC

I’ve used this technique on costrels before. When the leather is dry, peel it off.

SONY DSC

Cut off the spare bits, leaving enough to fold up along the bottom edge. The original has this edge folded and stitched. You may need to skive the edge, depending on how thick the leather is. Fold, stitch, do the back seam and put a roll of leather in the top ring. It comes out looking like this:

SONY DSC

The narrow bit needs a little work, I had to rewet it and gently work it into shape.

Dye this bit next…

SONY DSC

and discover that this piece of leather won’t take darker brown dye. I tried water-, spirit-, and oil-based dyes and none of the worked. I had to hurriedly make a new one from some different leather.

SONY DSC

I think this one is better, anyway. It took the dye properly and I was able to do the seam that holds it all together. Just the hanging straps to go now.

 

 

Hedeby quiver – part the second

Sorry about the delay between updates. That’s my workshop, right in the middle of the purple bit to the west of Sydney. We took the thermometer out there in the last heatwave and it got to 57°.

c3su0rkuyaa27eb

It’s been like this since December, we get 3-5 hot days followed by two relatively cooler days in the low 30s. Rinse, repeat, rinse a couple more times.

Progress has been slow, because the embossed and moulded parts need me in the workshop making the moulds.  Here’s the progress so far.

SONY DSC

Transfer the patterns to the leather and cut out the shapes. The triangular bit of waste at the bottom right is used to make one layer of the suspension lugs. The stringy bits will get used too.

SONY DSC

Mould the bottom bits. This is the front, it took about 20 minutes to get it to shape, I just used hand pressure to hold the leather in place while it set. The embossing (copied from the original) helped it sit the way it was supposed to.

SONY DSC

The back comes further around to the front. Another 20 minutes in stupid heat with hand pressure. I used my thumbs to work out any small ripples in the surface. The front piece is drying in the background.

SONY DSC

The account in Die Lederfunde Von Haithabu shows narrow folded bits of calf-skin and suggests that they may have been used to edge the larger pieces. I’m going with 1mm calf-skin and using 3mm diameter cotton piping cord inside to help give it shape. While there’s no trace of fibre inside the folded fragments on the originals, there is leather filling the top roll. It’s what I would have done had I been making the original. Dipping the ends of the cord in beeswax stops them fraying.

SONY DSC

To help hold everything together and avoid puckering or bagging, I used basting stitches to hold the piping in place before attaching the multiple layers together. In this case, on the lower front piece.

SONY DSC

The mounting lugs are made from two layers, with a moulded ridge so they sit further back on the hip than would otherwise be the case.

SONY DSC

The front is complete, I’m about to attach the suspension and then attach the back. Basting stitches again hold the piping in place until I can get the parts all stitched together.

I’m now a bit further along than shown in the picture, but I haven’t yet got to the point of splashing dye around. I’ll do another update when I get there.

Hedeby Leatherwork

Nothing original this time, I just found Willy Groenman van Waateringe’s Die Lederfunde Von Haithabu (Leather Finds from Hedeby) (1984) online and thought you might be interested…

I’ll be making a quiver or two later, so stay tuned.